|
freetubester (November 30, 1999 at 12:00 am)
@ZoeMarks Sorry to take so long getting back. It was working but unless it can do work it is no good. I want to see one belted to a generator/alternator, etc.
ZoeMarks (November 30, 1999 at 12:00 am)
@samuraidave1 - whatever...
samuraidave1 (November 30, 1999 at 12:00 am)
frequency magnetic oscillation , turns magnetic feilds on and off. with frequencys, thus imitating coil magnet movments, making electricity without movement.
at a certain frequency the magnetic feild of a manet can be manipulated. so at a figh frequency electricity can be made through magnetic oscillation..
kawless (November 30, 1999 at 12:00 am)
Square wave with a mechanical guide arm?
The arm would have to go up and down at mach 2, at least.
I'd say more like a saw wave.
gsgkill (November 30, 1999 at 12:00 am)
if you can move the stator arm yourself and it works, then it will work when you have the movement right with the cam, that is an obvious deduction.
MazzprezRec (November 30, 1999 at 12:00 am)
SIR I BELIEVE U NEED A STRING MATTER NOT A BOLT OR SCREW TO MAKE A WAVE MOTION
ZoeMarks (November 30, 1999 at 12:00 am)
@freetubester - so was it a working version?
freetubester (November 30, 1999 at 12:00 am)
@ZoeMarks I did view a wheel with magnets all pointing out on an angle and the opposite poles were mounted on two curved arms that repelled that wheel fast as hell but I did not see a belt applied for a generator. The arms folded down to stop.
TTHRftw (November 30, 1999 at 12:00 am)
use 2 time's the top and place magnets axross so top , take 0-90-180-270-360°
and bottem 45-135-225-315°
Then take both arms the same length and put the connection to the wood at the same distance .
if you can . dont know if it works :-)
TheCuged (November 30, 1999 at 12:00 am)
A study failed |
